Maintenance Guide for Walking Electric Pallet Trucks
First of all, always pay attention to the battery power and charge it in time to ensure sufficient power. Secondly, check the reliability and flexibility of the steering components, as well as the tightness of each component, such as wheel screws, steering screws, wheel fixing rods, lifting chain pull-in screws, etc. In addition, regularly check for leakage, including hydraulic system lifting cylinders, batteries, drive motors, pipe joints, etc. At the same time, check the pedal strength and control handle button quality of the walking electric transporter. In addition, regularly check the wear of the drive gear, add lubricating oil in time to ensure its smoothness and avoid excessive wear. In addition, check the acceptance strength of the fork and the movement of the hydraulic cylinder. If it becomes blunt, add lubricating oil.
During maintenance, overcharging and over-discharging of the battery should be prohibited, and balanced charging should be performed. Newly purchased electric vehicles should be fully charged at one time, and the battery should be charged according to the working frequency. Do not place conductive objects on the battery during charging, and keep the battery appearance clean and dry. During operation, the battery voltage, electrolyte density and temperature need to be checked once a week, and the total amount measurement should be done once a month. The battery should be placed in a clean, dry and ventilated place, avoid exposure to direct sunlight, and never touch the battery or heavy objects. After the vehicle is used, it is necessary to clean the dirt and garbage on the vehicle and check whether the power cord is intact. In addition, the hydraulic system needs to be maintained every six months to check whether the cylinder, joints, hoses, etc. are leaking, and whether the electrical insulation is normal.
Finally, when using a pedestrian electric transporter, be sure to check whether the handbrake is in the proper position to avoid collisions or accidents. If an accident occurs, quickly pull down the power switch to cut off the power to ensure safety. Through the above maintenance methods, you can ensure the normal operation of the pedestrian electric transporter, extend its service life, and reduce the possibility of failure. Thank you for the support of new and old customers. If you have any technical questions, please feel free to consult.